1.1 Project’s name

1.2 general contractor

1.3 Consultant

1.4 weather conditions

2.1 Superintendent

2.2 Foreman

2.3 installers

3.1 Elevation

3.2 grid lines

3.3 Floor

4.1 Is this an ABAA project?

4.2 Sheet membrane or flexible flashing Manufactured / Product name

4.3 First Manufacturer / Product Name

4.4 Putty / LM manufacturer / Product name

4.5 Concrete substrate, acceptable (Y/N) and if not, why?

4.6 Dens Glass is acceptable (Y/N) and if not why?

4.7 Acceptable CMU substrate (Y/N) and if not, why?

4.8 Other: (name) acceptable (Y/N) and if not, why?

4.9 Details (penetrations, outside corners, inside corners, openings), perform a destructive test and attach images.

4.10 Number of laps, check three areas and confirm if they pass or fail and if they fail, why?

4.11 Lap Shingle check three areas and confirm if they pass or fail and if they fail why?

4.12 What kind of end holds are we using?

4.13 End Dams check three areas and confirm if they pass or fail and if they fail why?