GENERAL TRAINING OF OUR SOFTWARE, Join our free weekly webinar

*Certificate of participation and free recording available afterward. Duration: 1 hour.

Days

Hours

Minutes

Seconds

Diving Equipment Inspection Checklist by Full Audits

Checklist Library

ID: fc26600b

Diving Equipment Inspection Checklist

This checklist is a useful tool for divers and dive masters inspecting diving equipment. Inspection is an important part of dive preparation to ensure diver safety. Diving equipment must be maintained in good condition for safe use. The equipment must be kept clean and meet all safety requirements. This checklist will help divers check the condition of their equipment before each dive.

Basic Diving Equipment

1.1 Are the regulators without visible damage?

1.2 Is there enough airflow when the safety valve is opened?

1.3 Are the air tanks approved by the safety department?

1.4 Are the pressure gauges in good condition?

1.5 Are the shop windows visible?

1.6 Are the bottles and whistles working properly?

1.7 Are the balloons at the proper pressure and flow rate?

1.8 Is the mask clean?

1.9 Is the grounding equipment free of defects?

1.10 Is the pocket kit complete and in good condition?

1.11 Is the jacket in good condition?

Jonck's team

2.1 Is the flotation system complete and in good condition?

2.2 Is the diving equipment clean?

2.3 Is the door closer working properly?

2.4 Are the flotation dampers on?

2.5 Is the supplementary ballast equipment clean?

2.6 Are the air regulator(s) ready?

2.7 Are the static guides and accessories clean?

2.8 Is the emergency kit complete?

2.9 Is the equipment adjusted to allow safe navigation?

2.10 Are there enough sandwiches?

Others

3.1 Are the joints clean?

3.2 Is the plunger cage free of defects?

3.3 Is much of the equipment rust-free?

3.4 Is the air pressure of the whistles adjusted?

3.5 Are the resistors ready?

3.6 Is the cat's belly clean?

3.7 Are all connectors free of damage?

3.8 Is the Penguin Man's cabin clean?

3.9 Are the electrical cables in good condition?

3.10 Is the clamping base clean?

3.11 Is the converter clean?

3.12 Is the turret properly contained?

Copyright © 2021 FullAudits.
All Rights Reserved.

Terms and Conditions

Privacy policies

Contact us

Follow us on networks

Full Audits Newsletter

Subscribe to our newsletter and access content relevant to your business.

Checklist

Audits

Action plans and incidents

Dashboard and analytics

Teamwork